Balluff BIS M-4A3-082-401-07-S4 Anleitung Seite 114

BIS M-4A_-082-401-07-...
Industrial RFID-System BIS M
6
System Functions (continued)
Balluff Standard (as-delivered state)
(BIS M-4A9-082-401-07-PU1-0.3)
LED 1 (Operating State and Communication)
Name
Failure
Communication
Ready
Tab. 6-17: LED meaning and configuration – Balluff Standard, LED1
LED 2 (Indication/Warning/Teach/Ping)
Name
Ping
Short Circuit Pin 2 / Pin 4
Teach In
Maintenance Required
Bad Signal Quality
Out of Specification
Data Carrier Access Active
Function Display
Tab. 6-18: LED meaning and configuration – Balluff Standard, LED2
Namur Standard
(BIS M-4A9-082-401-07-PU1-0.3)
LED 1 (Operating State and Communication)
Name
Failure
Communication
Ready Diagnosis On
Ready Diagnosis Off
Tab. 6-19: LED meaning and configuration – Balluff default, LED1
54 english
Signal
Red, static
Green, alternating with
LED off in a ratio of 10:1,
1 s period
Green, static
Signal
Blue, flashing, 3 Hz
Red, flashing, 3 Hz
Red, static
Blue, static
Orange, flashing, 1 Hz
Yellow, flashing, 3 Hz
Static white
Yellow, static
Signal
Red, static
Green, alternating with
LED off in a ratio of 10:1,
1 s period
Green, static
Static white
Meaning
General error
IO-Link communication is active. The device is ready.
The device is ready. Diagnosis functions are on.
Meaning
The ping can be activated via a system command to find
the device again.
Short circuit at pin 2 or pin 4
The sensor is currently in Teach-In mode
Maintenance must be performed. Threshold value of
inclination is exceeded (default: Function switched off).
Poor signal quality (number of bad data carrier accesses)
The device is operated outside of specifications.
Data carrier communication (read or write)
CP signal (data carrier within RFID range)
Meaning
General error
IO-Link communication is active. The device is ready.
The device is ready. Diagnosis functions are on.
The device is ready. Diagnosis functions are switched off.