Scope Of Delivery; Instructions For Use - Ottobock 6A30-20N Gebrauchsanweisung

Allowable environmental conditions
Humidity: fresh water, salt water – cleaning and drying is required
after contact and use.
Allowable immersion depth: 1 m
Unallowable environmental conditions
Sauna, extreme watersports
Mechanical vibrations or impacts
Perspiration, urine, acids or bases
Dust, sand, highly hygroscopic particles (e.g. talcum)
2.4 Lifetime
Depending on the patient's level of activity, the service life of the
product is 3 to 5 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or
CAUTION
injury.
3.2 General safety instructions
CAUTION!
Risk of injury and risk of product damage
► Comply with the product's field of application and do not expose
it to excessive strain (see page 9).
► Note the combination possibilities/combination exclusions in the
instructions for use of the products.
► Do not expose the product to prohibited environmental condi­
tions.
► Check the product for damage if it has been exposed to prohib­
ited environmental conditions.
10
► Do not use the product if it is damaged or in a questionable con­
dition. Take suitable measures (e.g. cleaning, repair, replace­
ment, inspection by the manufacturer or a specialist workshop).
► To avoid the risk of injury and product damage, do not use the
product beyond the tested lifetime.
► To avoid the risk of injury and product damage, only use the
product for a single patient.
► To prevent mechanical damage, use caution when working with
the product.
► If you suspect the product is damaged, check it for proper func­
tion and readiness for use.
► Do not use the product if its functionality is restricted. Take suit­
able measures (e.g. cleaning, repair, replacement, inspection by
the manufacturer or a specialist workshop).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern, a change in the positioning of the prosthetic com­
ponents relative to each other and by the development of noises.

4 Scope of delivery

6A30=20N Shuttle Lock
Quantity Designation
1

Instructions for use

1 Shuttle lock housing
1 Ratchet unit
1 Pin
1 Set screw
1 Dummy set
Consisting of: 1 plate dummy, 1
ratchet unit dummy, 1 countersunk
head screw, 4 nails
Reference
number
–
5X120
6A52=K
6Y13=1
506G21=M4x­
10
5X108