Scope Of Delivery; Instructions For Use; Preparation For Use - Ottobock 1C10 Terion Gebrauchsanweisung

4 Scope of delivery

Quantity
1
1
1
1
1
1

5 Preparation for use

CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
NOTICE
Grinding the prosthetic foot or footshell
Premature wear resulting from damage to the product
► Do not grind the prosthetic foot or footshell.
5.1 Alignment
INFORMATION
There is a plastic adapter cover on the proximal connection of the prosthet­
ic foot. This protects the connecting section from scratches during the
alignment and trial fitting.
► Remove the adapter cover before the patient leaves the workshop/fit­
ting area.
5.1.1 Applying/removing the footshell
Inserting the foot into the footshell
Recommended tools: 2C100 changing device for footshell
>
1) Pull the Spectra sock over the prosthetic foot, avoiding any wrinkles.
2) Slide the prosthetic foot into the footshell. Insert the carbon spring into
the slot on the toe insert (see fig. 4).
3) Push the prosthetic foot into the heel area of the footshell until it locks
into place (see fig. 6).
4) Place the connection cap on the footshell (see fig. 7).
Designation

Instructions for use

Prosthetic foot
Footshell
Connection cap
Toe insert
Protective sock
Reference number
–
–
2C12=*
2C13=*
–
SL=SPECTRA-SOCK-2
Ottobock | 15