The Timer; Setting The Time; Setting The Start Time - hanseatic 65C90C7-E11B200 Gebrauchsanleitung

The timer

Setting the time

When starting up the appliance for the first
time or after a power failure, the display will
show 0:00 . The time must be set.
88:88
c
888
(20) (19)
1. Tap the sensor (20).
0
will flash on the hour indicator.
2. Turn the dial (16) until the display (19)
shows the current hour (
3. To save the setting, tap the
(20) again.
00
will flash on the minute indicator.
4. Turn the dial (16) until the display (19)
shows the current minute (
5. To save the setting, tap the
(20).
The time is set.
If you want to change the time already
set, for example, changing from day-
light savings time to standard time, proceed
in the same manner.
(16)
0 23
- ).
sensor
0 59
- ).
sensor
The timer

Setting the start time

If you don't want the cooking process to be
started immediately, but at a certain time, you
can set a start time, with the exception of:
Functions and .
Requirement: The time is set.
88:88
c
888
(20) (19)
1. Tap the sensor (20).
The indicator showing the current hour
will flash.
2. Turn the dial (16) until the display (19)
shows the desired start hour (
3. To save the setting, tap the
(20) again.
The indicator showing the current minute
will flash.
4. Turn the dial (16) until the display (19)
shows the desired start minute (
5. Do not tap the hour sensor again, but
instead
– select the desired function, temperature
and cooking time (see „Start the cooking
process" on page EN-20) and
– start the cooking process.
The hourglass symbol
tom right of the display to indicate that you
have set a start time. When the start time is
reached, you will hear a signal tone and the
cooking process will start.
Page EN-27
(16)
0 23
- ).
sensor
0 59
- ).
appears at the bot-