Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The timer
All steps regarding the timer must be
quickly carried out one after the other.
The process stops if there is a pause longer
than 5 seconds.
Setting/changing the time
Setting the time
During initial commissioning or after a power
failure, the display "0: 0 0" flashes. This indi-
cates that the time must be set.
1. Press the "MENU" button once.
display shows the symbol " ", the dot un-
derneath flashes.
2. Set the time using the arrow buttons "<"
or ">".
Shortly after the last keystroke, the dot
stops flashing. The time is now saved.
To quickly go forwards/backwards,
hold the corresponding button down.
Changing the time
This is necessary e.g. when changing to and
from summer time.
Requirements:
– The timer switch must not be in automatic
mode and
– the countdown timer must not be active.
1. Press the two arrow keys "<" and ">" si-
multaneously.
The dot beneath the symbol " " flashes.
2. Set the time using the arrow buttons "<"
and ">".
Timed operation
WARNING
Please ensure that you always observe
the following when using the timer op-
eration:
Please make sure to inform all mem-
■
bers of the household so that they do
not put anything in the oven.
Monitor the oven in order to prevent
■
spills and burning.
Take special care when roasting: Fat,
■
oil and alcohol can ignite.
Never leave anything to grill unat-
■
tended when using the timer opera-
tion.
The timer does not control the switch-
■
ing on and off of the hob.
After use, set the function selector and
The
■
the temperature controller to »0«.
All settings will be deleted in the case
■
of a power failure.
Timed operation allows you to specify the de-
sired cooking duration. The cooking time can
be from one minute to 10 hours. The oven
switches off automatically when the cooking
duration has come to an end.
Please note! In the case of a power failure
any programming will be deleted.
The correctly set time is a prerequisite.
Page EN-27
The timer
Werbung
Inhaltsverzeichnis
