Page EN-34
Installing the oven
Inserting the oven
NOTICE
Risk of damage!
Only lift the oven using the carrying
■
handles on the sides. The door is not
suitable for this purpose.
Requirement: The power cord must be fitted
to the oven by a specialist.
1. Use the carrying handles on the side of
the oven to lift it and then push it as far
back into the built-in cabinet so that the
connections and earthing screw for the
hob can still be easily reached.
2. Insert the hob plugs into the sockets on
the top of the cooker. Do not use any
force. The plugs are coded. Polarity rever-
sal is therefore not possible.
3. Insert the mains plug into a properly in-
stalled socket
4. Keep the oven centred and push it fully
into the built-in cabinet.
The mains connection must not be
kinked, pinched or otherwise damaged.
5. Screw the oven to the built-in cabinet with
the two screws which have been sup-
plied.