Product Description; Combination Possibilities; Intended Use - Ottobock Varos 5A60-Serie Gebrauchsanweisung

2 Product description

2.1 Design
The product consists of the following components:
2.2 Function
The product is a transfemoral socket with a modular structure. The product connects the residual
limb to the knee joint. The product can be adapted to the volume of the residual limb while it is
being worn.
The length of the product is adjusted by qualified personnel. The circumference can be individu­
ally adjusted by the user in the course of day-to-day use.

2.3 Combination possibilities

This product can be combined with the following Ottobock components:
• All electronic, mechatronic and mechanical knee joints
Adapters
• 4R54 Socket adapter with pyramid adapter
• 4R74, 4R74=AL Socket adapter with pyramid adapter
• 4R23 Socket adapter with pyramid adapter
• 4R77 Socket adapter with pyramid adapter, rotating
• 4R73=A, 4R73=D Socket adapter with pyramid adapter, eccentric
• 4R55 Socket adapter with pyramid receiver
• 4R95 Socket adapter with pyramid receiver
• 4R22 Socket adapter with pyramid receiver
• 4R51 Socket adapter with pyramid receiver, rotating
• 4R37 Socket adapter with pyramid receiver, rotating

3 Intended use

3.1 Indications for use
The product is to be used solely for the prosthetic treatment of the lower limbs. The product is to
be used for the treatment of transfemoral amputations.
3.2 Area of application
Our components perform optimally when paired with appropriate components based upon weight
and mobility grades identifiable by our MOBIS classification information and which have appro­
priate modular connectors.
1. Lateral socket shell
2. Upper Boa cable
3. Medial socket shell
4. Lateral side rail
5. Connection adapter
6. Lower Boa cable
7. Lower Boa dial
8. Upper Boa dial
9. Socket brim pad
10. Medial side rail
11. Magnetic bottom shell
12. Fabric adhesive strips
25