Transport, Unpacking, Assembly; Transport, Unpacking; Storage - Siemens SIMOVERT Master Drives Betriebsanleitung

02.04
2

Transport, unpacking, assembly

2.1

Transport, unpacking

The units are packed at the manufacturing works in conformity with the order. A product packaging plate is
attached to the box.
Avoid extreme vibrations and hard impacts during transport, e.g. when lowering the unit.
Pay attention to the notes on the packaging relating to transport, storage and proper handling.
The converter can be installed after unpacking it and checking the consignment for completeness and
damage.
The packaging consists of cardboard and corrugated cardboard. It may be disposed of in accordance
with local cardboard disposal regulations.
You should notify your freight forwarder immediately if you discover any transportation damage.
2.2

Storage

The units must be stored in clean dry rooms. Temperatures between −25 °C (−13 °F) and + 70 °C (158 °F)
are permissible. Temperature fluctuations > 20 K per hour are not permissible.
Siemens AG 6SE7087-6AE85-0AA0
Common Rectifier Operating instructions
Transport, unpacking, assembly
2-1
ENGLISH