Applied Standards - Siemens SIMOVERT Master Drives Betriebsanleitung

02.04
14.3

Applied standards

DIN VDE 0100
Part 540 A11.91
DIN VDE 0106
Part 1 A05.82
Part 100 A03.83
DIN VDE 0110 Part 1 and 2
A01.89
DIN VDE 0113
Part 1 A06.93
DIN VDE 0160 E04.91
DIN VDE 0298
Part 2 A11.79
Part 4 A02.88
DIN VDE 0470 Part 1 A12.92
DIN VDE 0558 Part1 A07.87
DIN VDE 0843
Part 2 A09.87 Z
DIN VDE 0875
Part 11 A12.88 Z (EN 55014: 1987) Ersetzt durch DIN VDE 0875, Teil 14 und DIN VDE 0075
Part 1 A07.92
DIN 41494 Part 5 A9.80
DIN 41651 Part 1 A9.89
DIN IEC 60068 Part 2
DIN IEC 60721
Part 3 A08.87
IEC 60801
Part 4
EN 60146-1-1: 1993
Part 1-1
UL 508 C
SN 36350
EN 61800 Part 3
Siemens AG 6SE7087-6AE85-0AA0
Common Rectifier Operating instructions
Erection of power installations with rated voltages up to 1000 V,
Selection and erection of electrical equipment, earthing, PE conductor,
equipotential bonding conductor
Protection against electric shock:
Classification of electrical and electronic equipment (IEC 536)
Arrangement of actuation elements in the proximity of shock-hazard parts
Isolation coordination for electrical equipment in low-voltage installations
Safety of machines: electrical equipment of machines,
General requirements (EN 60204-1:1992)
Equipping power installations with electronic equipment
Use of cables and insulated cables for power installations:
Recommended values for the current carrying capacity of cables with rated
voltages U / U to 18/30 kV
0
Recommended values for the current carrying capacity of cables
Types of protection, shock, foreign body and water protection for electrical
equipment (EN 60529: 1991)
Semiconductor converters: general regulations and special regulations for
line-commutated converters
Electromagnetic compatibility of instrumentation and control equipment in
industrial process engineering:
Interference resistance to static electricity discharges; requirements and
measurement methods (IEC801-2) Ersetzt durch DIN EN 60801, Teil 2
(09.87)
RFI suppression of electrical equipment and installations:
(EN 55011: 1991)
Equipment practice for electronic facilities; subracks and modules
Connectors for printed circuits for connecting ribbon cables with round
conductors; indirect insertion, grid dimension 2.54 mm
Elektrotechnik; Grundlegende Umweltprüfverfahren; Prüfungen
Electrical engineering; classification of environmental conditions:
classes of influencing quantities
Electromagnetic compatibility for industrial - process measurement and
control equipment
Electrical fast transient / burst requirements
Semiconductor converters;
General requirements and line-commutated converters:
Definition of basic requirements (IEC146-1-1991)
Power Conversion Equipment
Environmentally compatible product design
EMC product standard for variable-speed drives
Technical data
14-7
ENGLISH