Kemper KHS Mini MASTER 2.1 Montage- Und Bedienungsanleitung Seite 155

Routine time
If there is no temperature flushing within
7 days, water exchange is guaranteed
through the „Routine time" operating
mode. In the „Routine time" operating
Routine duration
If there is no temperature flushing within
the configured interval, the water exch-
ange is guaranteed through the „Routine
duration" operating mode. To accomplish
Routine volume
If there is no temperature flushing within
the configured interval, the water exch-
ange is guaranteed through the „Routine
volume" operating mode. To accomplish
© www.kemper-olpe.de – 09.2020 / K410068602008-00 – 155 / 259
Routine time
In this sample project, it is cold water.
The cold water temperature in winter
could always be below the starting
temperature. Nevertheless, to prevent
stagnation, routine water exchanges
can simulate operation for the intended
purpose. The „Routine" line type can be
selected from the drop-down list.
The desired weekday can also be
selected from a drop-down list. Click in
the box of the weekday in question to
activate it with a check mark.
mode, the starting time, the duration and
the weekdays of the water exchange can
be defined.
that, the decisive interval (max. 168 h)
and the duration of the water exchange
can be stored in the „Routine duration"
operating mode.
this, the decisive interval (max. 168 h), the
volume and the maximum flushing time
of the water exchange can be assigned to
the „Routine volume" operating mode.