Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Configuration of temperatur sensor
Miscellaneous settings
Alarm relay setting
Operating cylce reset
Software version
Simultaneous opening of valves
V1/V2 during hygiene flushing
112 / 259 – K410068602008-00 / 09.2020 – © www.kemper-olpe.de
Select sensor
Lower limit
OK
Alarm in the event of the Control System own faults, or in
the event of system faults.
OK
Depending on the valve type, a maintenance request is
generated after 20,000 switching cycles (spring drive, servo
drive) or 50,000 switching cycles (hygiene flushing box).
OK
After maintenance, the operating cycles of the actuator
should be reset.
Overview of the software version of the selected Control
System.
Setting for the simultaneous opening of two valves in a KHS
HS2. Depending on the flow rate, the following instructions
apply with regard to sound protection and free discharge.
OK
Upper limit
OK
OK
OK
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
