Kemper KHS Mini MASTER 2.1 Montage- Und Bedienungsanleitung Seite 129

Selection interface
Input box
© www.kemper-olpe.de – 09.2020 / K410068602008-00 – 129 / 259
The „DEVICE SETTINGS" menu interface is a dynamic inter-
face. The selection interface of the installed KHS Mini Control
System are shown on the left-hand side. Click on the desired
KHS Mini Control System to open the relevant input box.
The changes must be written into the control
after every change in the input box. If another
KHS Mini Control System is selected immedia-
tely after a change in the selection interface,
the changes are automatically discarded.
If a KHS Mini Control System is selected in the selection inter-
face, the input box appears on the right-hand side. Use this
box to allocate the related actuators and sensors to the KHS
Mini-Control System. If an error occurs in the Control System,
it can be reported across the entire system. To do this, set the
button to . The remaining input options of the input box
are explained in the following.