Read Configuration From Usb Stick; Copy Data Log To Usb Stick; Software Update From Usb Stick; Copy Web Server From Usb Stick - Kemper KHS Mini MASTER 2.1 Montage- Und Bedienungsanleitung

5.4

Read configuration from USB stick

When this menu item is selected, a
configuration is read from the USB stick as
5.5

Copy data log to USB stick

If the „Datalogging" mode is activated,
the measured values are copied to the
5.6

Software update from USB stick

When this menu item is selected, a
software update is carried out on the
5.7

Copy web server from USB stick

When this menu item is selected,
the web server is updated with the
After an update, the software version must be adjusted and a function
check carried out on each system control and hygiene flushing box.
You can find the current software version at kemper-olpe.de/de/
geschaeftsbereiche/gebaeudetechnik/service/ downloads/
© www.kemper-olpe.de – 09.2020 / K410068602008-00 – 123 / 259
a CFG file and written to the controllers.
USB stick when this menu item is selected.
system control with the UPE file on the
USB stick.
„KHSWebserver" folder on the USB stick.