Valve Manual Mode - Kemper KHS Mini MASTER 2.1 Montage- Und Bedienungsanleitung

EN
Progr. Switchover
3.1.2.7
With the KHS Mini Control System
MASTER 2.1, it is possible to run a
function test of the valves using the
„Valve manual mode" submenu.
Furthermore, the valves can be individually
A function test is recommended after configuring the „Device settings"
118 / 259 – K410068602008-00 / 09.2020 – © www.kemper-olpe.de
The two mentioned flushing programs can be switched using an ex-
ternal manual switch. The electrical connection is shown in Chapter 2.2.
Progr. Deactivate switchover
OK
Block system/select program
Select external input action

Valve manual mode

Maintenance:
submenu to rule out possible errors immediately.
OK

OK

OK
addressed during maintenance. The
functions are shown in the following
illustration. Manual operation is not
possible for the CoolFlow cold water
regulating valve.
OK
OK
OK