EN
Program switch
Other settings
6.3
In the „DEVICE SETTINGS" menu
interface, the individual KHS Mini Control
128 / 259 – K410068602008-00 / 09.2020 – © www.kemper-olpe.de
With the KHS Mini Control System -MASTER 2.1- it is possible
to switch between two flushing programs. The programs can
4
be configured in the Operating modes menu interface and
the individual Control System can be added (see Chapter 6.2).
If the button for the program switchover is set to
external program switching is deactivated. If the button for
the program switchover is set to
switching is active. The names of the flushing programs can
be changed with an entry in the related box. Use the „Cur-
rent operating mode" drop-down list to manually switch the
flushing programs in the web server and to block them for
maintenance purposes. Use the „External input" drop-down
list to set the operating mode of the external input.
Maintenance:
The two flushing programs mentioned above can be switched using the
web browser and can be blocked for maintenance purposes.
The KHS Mini Control System -MASTER 2.1- can activate an
5
internal buzzer in case of faults. If the related button displays
, the alarm buzzer is activated. If the related button
displays
drop-down menu you can also customise the language setting
of the control.
Device settings
, the alarm buzzer is not activated. Using the
System with integrated actuators and
sensors are logically linked to each other.
, the
, the external program