Kemper KHS Mini MASTER 2.1 Montage- Und Bedienungsanleitung Seite 149

To simplify configuration and to guarantee correct installation, fill in the
system commissioning overview of the KHS Mini Control System (see
https://www.kemper-uk.com/building-technology/service/downloads/)
before making the settings.
It is mandatory to fill in the form to be able to take advantage of
the optional factory support.
The selected times and temperatures serve as examples.
The values must always be set for each building and for each type of use
and medium so that representative measurement values are generated
and intended use is maintained for the system.
Configuring Time flushing on A-valve for KHS actuator 230V /
KHS CoolFlow 230V
© www.kemper-olpe.de – 09.2020 / K410068602008-00 – 149 / 259
Select type
After a line has been added using
LINE, the line type is selected. The KHS
Mini Control System in this sample pro-
ject is connected to an A valve. To time
control the water exchange, the „Time
flushing" line type must be selected
from a drop-down list.
ADD