Icom GM600 Bedienungsanleitung Seite 101

• GNS – GNSS fix data
$**GNS, hhmmss.ss, llll.ll, a, yyyyy.yy, a, c--c, xx, x.x, x.x, x.x, x.x, x.x, a*hh<CR><LF>
1 2 3
1 UTC of position (000000.00 to 235959.99)
2 Latitude (0000.0000 to 9000.0000)
3 N/S
4 Longitude (00000.0000 to 18000.0000)
5 E/W
Mode indicator (N=No fix, A=Autonomous, D=Differential, P=Precise,
6
R=Real Time Kinematic, F=Float RTK, S=Simulator mode)
7 Total number of satellites in use (no use)
• GLL – Geographic position – Latitude/longitude
$**GLL, llll.ll, a, yyyyy.yy, a, hhmmss.ss, a, x*hh<CR><LF>
1 2 3 4
1 Latitude (0000.0000 to 9000.0000)
2 N/S
3 Longitude (00000.0000 to 18000.0000)
4 E/W
• VTG – Course over ground and ground speed
$**VTG, x.x, T, x.x, M, x.x, N, x.x, K, a*hh<CR><LF>
1 2 3 4 5 6
1 Course over ground, degrees true (0.0 to 360.0)
2 Unit T
3 Course over ground, degrees magnetic (no use)
4 Unit M
5 Speed over ground, knots (0.0 to 100.0)
www.busse-yachtshop.de | info@busse-yachtshop.de
4 5 6 7 8 9 10 11 12 13
5 6 7
7 8 9
DIGITAL-INTERFACE (IEC 61162-1)
8 HDOP (no use)
9 Antenne altitude, meters (no use)
10 Geoidal separation (no use)
11 Age of differential data (no use)
12 Differential reference station ID (no use)
13 Navigational status indicator (no use)
5 UTC of position (000000.00 to 235959.99)
6 Status (A=data valid V=data invalid)
Mode indicator (A=Autonomous, D=Differential, N=No fix, S=Simu-
7
lator mode)
6 Unit N
7 Speed over ground, km/h (no use)
8 Unit K
Mode indicator (A=Autonomous, D=Differential, E=Estimated, M=-
9
Manual input, P=Precise, S=Simulator, N=Data not valid)
14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
95