Symbols Used - pyrexx PX-IC Betriebsanleitung

Conformity in accordance with
EN 14604:2005/AC:2008 (CE)
The smoke alarm device is cer tified as
a construction product in accordance
with Construction Products Regulation
( E U ) N o 3 0 5 / 2 0 1 1 a c c o r d i n g t o
EN 14604:2005/AC:2008 (CE). The pro-
duction is monitored for unchanged com-
pliance with legal and normative require-
ments by periodic and independent checks.
The declaration of performance for
smoke detectors without "Q" label is
available at the following reference num-
ber at the manufacturer: k_ 95531
The declaration of performance for
smoke detectors with "Q" label is availa-
ble at the following reference number at
the manufacturer: k_76680
1.4 Safekeeping of the operating
manual
The operating manual is an impor tant
component of the smoke alarm device,
and must always be kept at hand near the
installation location.
44
Operating Manual: PX-1C - Smoke Alarm Device with Radio Link

1.5 Symbols used

Various markings and symbols are used in
the text in the operating manual.
These are explained below.
Warning symbol in warning labels
Additional information and
guidelines
(1) Numbered action steps
f Symbol for an instruction or a
required act
5 Result of an action
Symbol for a list
•
1.6 Copyright
All rights are reserved, particularly the
rights of duplication, distribution and trans-
lation. No part of these operating manual
may be reproduced in any form, or pro-
cessed, duplicated, or disseminated by
using electronic systems without written
permission of Pyrexx Technologies GmbH.
EN
EN