Adjusting The Programs; Step 1: Selecting Handpiece Or Transmission Ratio - Nouvag HighSurg 30 Bedienungsanleitung

HighSurg 30
7.4
7.4.1
Table of possible Handpieces, available for the 50,000 rpm motor
Name of Handpiece with
transmission ratio
Handpiece, 1:5
Handpiece, 1:3
Handpiece, 1:2
Handpiece, 1:1
Micro saws (Com., Osc., Sag.)
Dermatome
Kirschner Handpiece
Tattooing Handpiece
Jacobs Chuck
Perforator
Craniotome
Handpiece 4:1
Table of possible handpieces, available for the 80,000 rpm motor
Name of Handpiece with
transmission ratio
Handpiece, 1:5
Handpiece, 1:3
Handpiece, 1:2
Handpiece, 1:1
Jacobs Chuck
Perforator
Craniotome
Table of Handpiece OTO-Drill with integrated 16,000 rpm -motor
Motor with integrated
Handpiece OTO-Drill
OTO-Drill
HighSurg 30 Operating Instructions, Ref. 31666, V24/16
Downloaded from www.Manualslib.com

Adjusting the programs

Values for operation settings depend on the connected handpiece or contra angle as well as the task to be
performed.

Step 1: Selecting handpiece or transmission ratio

Depending on the handpiece or contra angle attached to the motor, the corresponding transmission ratio
has to be adapted accordingly by using the handpiece key.
Press the "Handpiece" key repeatedly until the name of the required handpiece with the corresponding
transmission ratio is shown on the display. When the key is pressed constantly the handpieces or contra
angles will be shown in fast forward mode.
Handpiece name
on Display
1 : 5
1 : 3
1 : 2
1 : 1
Micro Saw
Dermatome
Kirschner
Tattoo Hp
Jacobs Chuck
Perforator
Craniotome
4:1
Handpiece name
on Display
1 : 5
1 : 3
1 : 2
1 : 1
Jacobs Chuck
Perforator
Craniotome
Handpiece name
on Display
OTO Drill
manuals search engine
Speed Speed
min. rpm max. rpm
1500 240,000
900 150,000
600 100,000
300 50,000
fix 15,000
fix 14,000
500 2800
fix (9000/10,000/11,000/12,000)
200 2600
80 900
1000 50,000
200 12,000
Please note: The Shaver parameters are listed in a separate table on the next page
Speed Speed
min. rpm max. rpm
1500 240,000
900 150,000
600 100,000
300 80,000
80 2100
80 1200
1000 60,000
Speed Speed
min. rpm max. rpm
1000 16,000
Torque Torque
min. Ncm max. Ncm
fix 1
1 2
1 2
1 6
fix 6
fix 6
fix 48
fix 6
fix 60
20 80
fix 6
1 18
Torque Torque
min. Ncm max. Ncm
fix 1
fix 1
fix 2
fix 3
fix 35
20 60
fix 3
Torque Torque
min. Ncm max. Ncm
fix 1
13
EN