Configuration Menu - Nouvag HighSurg 30 Bedienungsanleitung

HighSurg 30
7.7
Access to Configuration Menu:
• Press "Enter" key for 3 seconds until a long tone is emitted.
The right arrow "
Changing certain parameters:
• Choose the desired parameter by pressing "Select
▲" or "Select ▼".
• Press "Enter" to activate setting mode. The value
of the parameter is now displayed in parentheses.
To change the value press "Select ▲" or
•
"Select ▼".
• To confirm the changes made, press "Enter" for
one sec., until a short tone is emitted.
• To abort the settings made, press "Enter" briefly,
the setting returns to its previous value, without
emitting a tone.
Exit from Configuration Menu:
• To leave the Configuration Menu press "Enter" for 3 seconds, until a long tone is emitted.
HighSurg 30 Operating Instructions, Ref. 31666, V24/16
Downloaded from www.Manualslib.com

Configuration Menu

In the Configuration Menu the user can customize the device after his favor. The parameters are organized
in two levels. "Parameter Level 1" comprises all basic information and possible settings that affect the
device itself. Parameter Level 2 includes all information and settings that involve the surgeon's work. In the
configuration menu the following information can be obtained or parameters can be set according to one's
own needs:
• Software version
• Mainboard serial number
• Date format US ?
• Date
• Time
• Battery voltage
• Language, DE/EN
• Display brightness
• Number of programs for 50,000 rpm motor
• Number of programs for 80,000 rpm motor
• Number of programs for Motor 16 OTO-Drill
• Behavior after switching on
• Operating hours HighSurg 30
Be cautious when changing parameters. Unusual behavior of instruments while operating may provoke
false reactions and jeopardize the patient.
Every setting and the new behavior of the instrument has to be verified and tested.
>
" in the information line on the display indicates that you're in the Configuration Menu.
manuals search engine
• Operating hours Motor 1
• Operating hours Motor 2
• Operating hours of irrigation pump
• Error-messages (the last 8)
• Activation of available handpieces (14 pos.)
• Enter Password
• Speed limitation for each handpiece
• Pump behavior (10 pos.)
• Motor behavior for 50,000 rpm motor
• Motor behavior for 80,000 rpm motor
• Motor behavior for Motor 16 OTO-Drill
• Reset to factory default
EN
17