Optional: Pedal Connection; Operation; Starting The Vacuson 40; Operation Without Pedal - Nouvag Vacuson 40 Bedienungsanleitung

Vacuson 40/60

4.5 Optional: Pedal connection

(According to each order an ON/ OFF pedal, an AIR-pedal or neither ON/ OFF pedal nor AIR-pedal are
included)
ON/OFF – pedal connection:
The ON/OFF – pedal (1) can be connected or
disconnected on the back panel of the Control
Unit.
In order for the system to remain airtight, cover the connection spigot with the cap if
not using the AIR - pedal.

5.1 Starting the Vacuson 40/60

Press green ON/OFF Switch.

5.2 Operation without pedal

Press "ON/OFF" to start pump action.
Even after stopping the suction procedure, some vacuum will remain in the system!

5.3 Optional: operation with "ON/OFF"-pedal

(According to each order an "ON/OFF" – pedal is included!)
The "ON/OFF" – pedal functions like a switch. Push pedal down to start suction procedure. To stop the
suction procedure push pedal down again.
•
If the ON/OFF pedal is connected, the suction procedure can be switched ON and
OFF with the pedal only.
•
Even after stopping the suction procedure, some vacuum will remain in the
system!
6
1 2
AIR – pedal connection:
The AIR - pedal can be connected on the back
panel "AIR PEDAL" (2).

5 Operation

NOUVAG AG
No. 31791 04/08