Explanation Of Symbols; Safety Information; Emc Manufacturer's Declaration Of Conformity; Integrated Peristaltic Tube Pump - Nouvag HighSurg 30 Bedienungsanleitung

HighSurg 30
2
3
3.1
3.2
HighSurg 30 Operating Instructions, Ref. 31666, V24/16
Downloaded from www.Manualslib.com

Explanation of symbols

Important information
Do not use if the packaging is damaged
Warning
Manufacturer
Type BF applied part
Applied parts is the instrument
Do not reuse
Biohazard
Socket for Motor 1
Pedal
Protection against continual
submerging.
Date of manufacture
CE symbol with notified body
Electrical and electronic devices that have reached the end of their service life comprise hazardous waste
and may not be disposed of together with household waste. Valid local disposal regulations apply.

Safety information

Your safety, the safety of your team, and of course that of your patients is very important to us. It is
therefore essential to bear the following information in mind:
Every use of the HighSurg 30 different to the product description defined in chapter "Intended use and
operation", causes risks for patients and trained personnel. If physical examinations and therapies are
carried out without use of the devices then the devices must be removed from the place of treatment.
Avoid any connection or close adjacency to other devices.

EMC Manufacturer's Declaration of Conformity

The use of (RF) Radio Frequency emitting devices and equipment as well as the occurrence of negative
environmental factors in the close area of the HighSurg 30 may cause unexpected or adverse operation.
Use only accessories and cables as specified in the product description. Further observe the EMC
manufacturers declaration of conformity.

Integrated peristaltic tube pump

The integrated peristaltic pump is used to cool tissue in order to prevent damage to the tissue. It may only
be operated with watery solutions, such as 0.9 % Sodium Chloride irrigation solution (Ref. 1707) or "Ringer"
solution. Supplying medication using the integrated pump is expressly prohibited.
manuals search engine
Autoclavable at 135°C
Suitable for thermal disinfection
Sterilized using ethylene oxide
Observe the instructions for use
Symbol indicating the serial number with the
date of manufacture (year/month).
Symbol indicating the order number.
Symbol indicating the lot number.
Socket for Motor 2
Containing phthalates
Certified by the Canadian Standards Association
(CSA)
Date of expiry
Warning, heated up surfaces
EN
3