Resetting The Default Settings - G&D VisionXS-IP-F-DP-UHR Installation Und Bedienung

Configuration
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. In the Keyboard layout

German

English (US)

English (UK)

French

Spanish

lat. American

Portuguese

Swedish
5. Click on
Save

Resetting the default settings

NOTE:
This function can be carried out only via web application.
This function is used to reset the default settings of the KVM extender. By perform-
ing this function, the default settings mentioned on page 26 are reactivated.
How to reset the default settings:
NOTE:
Open the local OSD of the user module by pressing the
Alt + Num ) if you want to reset the local settings of the user module only instead of
the settings of the extender system.
1. Open the remote OSD of the computer module by pressing
(default: Ctrl
Open the local OSD of the user module by pressing the
+ ) if you want to reset the local settings of the user module.
Alt Num
2. Select the row
(local OSD) and press
3. Select the row
4. Confirm the security prompt or cancel the process.
49 · G&D VisionXS-IP-F-DP-UHR
KVM extender
.
and then on the tab
General
field, select between the following options:
.
+ Num ) if you want to reset the settings of the extender system.
System setup (remote OSD) or
Enter .
Set system defaults
.
.
CON
Console utility
and press Enter .
local hotkey (default:
remote hotkey
local hotkey (default: