Once the control unit has been turned off the handheld automatically shuts off after approximately one minute. The handheld also automatically shuts
off when it is further than the maximum allowable distance away from the control until.
3.1.4. Handheld stand-by according to time
The entire x-ray unit will switch over to stand-by (even if the base is on) and the handheld will automatically shut off after approximately five minutes
of non-use to save battery power.
emission key, is pressed. To edit the standby time, refer to chapter 4 that deals with the handheld's "Advanced options".
3.2. Handheld display functions
3.3. Control panel
As illustrated in the figure below, the handheld has four function keys and a single x-ray emission key.
8
8
The handheld turns back on displaying the last selection made by the user whenever any key, except for the X-ray