Identification Nameplates - iM3 Revolution 4DC Bedienungsanleitung

12. Identification nameplates

WARNING!
Never remove the identification nameplates provided on the generator,
central control unit and collimator cone.
Central control unit (NAMEPLATE)
The nameplate is found beside the main switch.
Details shown on the nameplate:
• Name of the manufacturer
• Name of the equipment
• Rated voltage
• Type of current
• Rated frequency
• Maximum absorbed power
• Serial number
• Manufacturing date
X-ray unit head
The nameplate is found on the lower cover at the back of the radiogenic unit.
Details shown on the nameplate:
• Name of the manufacturer
• Name of the equipment
• Specifications
• Model and serial number of x-ray tube
• Equipment serial number
• Date of manufacture
Collimator
The nameplate for the collimator is found outside it.
Details shown on the nameplate:
• Name of the manufacturer
• Type of cone
• Serial number
• Date of manufacture
Handheld
The nameplate for the handheld is found in the battery compartment.
Details shown on the nameplate:
• Name of the manufacturer
• Name of the equipment
• Rated voltage
• Number and type of batteries
• Serial number
20 20 OPERATING INSTRUCTIONS
EN