Access Control For Local Authorisation; Installing The Master Key; Adding And Removing Passes In The Local Database; Removing The Master Key - alfen Eve Single Pro-line Bedienungsanleitung

2. PRODUCT
2.5 Access control for local authorisation (RFID)
To control local user access to an Alfen Eve Single Pro-line DE charging station, you need to install an RFID pass as the
'Master key' . With this Master Key, you can determine who can use your charging station.
REMARK
Your charging station must be configured correctly in order to accept Master Keys. For stand-alone charging stations this
functionality is automatically ON. If the charging station is delivered with a pre-programmed management system, this
functionality will be OFF.

2.5.1. Installing the Master Key

A Master Key can be easily installed using the following steps:
Select an RFID pass like the included Alfen pass, that complies with the specifications mentioned in paragraph 2.6.3.
1
Hold the RFID pass in front of the pass reader for 10 seconds. The charging station does not recognise the pass and
2
will give a warning first. You can ignore this.
After 10 seconds, the RFID pass will be registered as the Master key. The following icon appears on the screen:
3
The charging station will only recognise one RFID pass as the Master Key.

2.5.2 Adding and removing passes in the local database

Once the Master Key is registered, it can be used to add or remove charging passes from the local database. For every pass
held in front of the charging station, the station will give a sound signal. Follow the on-screen instructions to manage
access control:
Display
Supporting text
on display
If you add or remove a charge pass accidently, immediately hold it in front of the pass reader to undo the action.
To close the database, hold the Master Key in front of the pass reader once more.
REMARK
To prevent the local database from being 'open' to access control, the menu will close automatically if no card has been
detected or removed after 10 seconds. The symbol will disappear from the display.

2.5.3 Removing the Master Key

A Master Key can only be removed using the Service Installer application. If necessary, you can ask for help from one of our
technicians. This might, however, incur costs. Therefore, always keep the Master Key in a safe location. More information on
the use of the Service Installer application can be found in paragraph 4.3.2.
12
Hold the Master Key in front
of the pass reader
Master Key held in front of
reader
Add or remove charge passes
NOTICE!
The Master Key cannot be used for charging. It is only used
for access control of the charging station.
Hold the charge pass that you
want to add in front of the pass
reader
Pass added
Eve Single Pro-line DE manual | Version 1.0 | February 2020
Hold the charge pass that you
want to remove in front of the
pass reader
Pass removed