Displaying/Resetting Minimum Value Storage For Barometric Pressure; F) Display Area „Pressure History" (Barometric Pressure History) - Conrad 67 28 61 Bedienungsanleitung

 Displaying/Resetting Minimum Value Storage for Barometric Pressure
• Touch the display area „PRESSURE" repeatedly until the minimum barometric pressure and the display „MIN" (to
the left of the weather symbols) flash.
• To reset the minimum value storage, keep the display area „PRESSURE" pushed for 3 seconds. The new minimum
is the currently measured barometric pressure until it changes.

To get back to the first subfunction (selecting display for relative/absolute barometric pressure) -> touch
the display area „PRESSURE" briefly 2x
Leaving setting mode -> touch the button „PRESSURE" briefly 1x (or touch another display area wait for
30 seconds without touching the touch screen)
f) Display Area „PRESSURE HISTORY" (barometric pressure history)
The following setting and subfunctions are available:
• Switch between display of the barometric pressure history of the last 12 or 24 hours
Proceed as follows:
• Touch the display area „PRESSURE HISTORY" so that the hour figures in the area of the barometric pressure
history display flash.
• Select the desired display with the buttons „+" and „-".
You may set:
-12h -10h -8h -6h -4h -2h -1h 0h
-24h -20h -16h -12h -8h -4h -2h 0h

Leaving setting mode -> touch the button „PRESSURE HISTORY" briefly 1x (or touch another display
area wait for 30 seconds without touching the touch screen)
76
Barometric pressure trend for the past 12 hours
Barometric pressure trend for the past 24 hours