g) Display for air pressure, tendency and moon phase
Reading display, switching units
On the top right, the present reading of the air pressure appears in the corresponding unit (mmHg,
inHg, hPa/mBar).
Change between the units as follows:
• Hold the "UNIT" button down on the back until the unit (mmHg, inHg, hPa/mBar) flashes.
• Select the desired unit with the " " and " " button.
• Confirm the setting by briefly pressing the "UNIT" button.
Display of altitude, air pressure at sea level/local
Normally "Local" appears next to the reading display. This indicates that the air pressure is
calculated/displayed for the current altitude.
By pressing the "PRESSURE/ALTITUDE" button briefly, you can switch between the display of the
local air pressure ("LOCAL" display) and the display for calculating the air pressure at sea level ("SEA
LEVEL"). The current altitude is also displayed.
The air pressure readings which you get from, eg the radio or Internet, are always converted to sea
level. You can enter this reading as a reference value.
• With the "PRESSURE/ALTITUDE" button you change to the sea level display.
• Press the "PRESSURE/ALTITUDE" button down until the display of air pressure flashes.
• You can now set the air pressure reading with the " " and " " buttons
• Confirm the setting by briefly pressing the "PRESSURE/ALTITUDE" button.
By setting the air pressure reading at sea level, the set altitude automatically changes
when you first use the device!
67