Setting And Activating/Deactivating Wind Speed Alarm; Setting And Activating/Deactivating Wind Direction Alarm; Displaying/Resetting Maximum Value Storage For Wind Speed - Conrad 67 28 61 Bedienungsanleitung

 Setting and Activating/Deactivating Wind Speed Alarm
• Touch the display area „WIND" repeatedly until the wind speed and the display „HI AL" flashes.
• Select the wind speed with the buttons „+" and „-". Keep the respective button pressed for quick adjustment.
• Use the button „ON/OFF" to switch the alarm function on or off.
With the alarm function on, the icon „
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„HI AL" and the icon „

To get to the next subfunction (setting and activating/deactivating the wind direction alarm) -> touch the
display area „WIND" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Setting and Activating/Deactivating Wind Direction Alarm
• Touch the display area „WIND" repeatedly until the wind direction flashes.
• Select the wind direction with the buttons „+" and „-".
• Use the button „ON/OFF" to switch the alarm function on or off.
With the alarm function on, the icon „
weather station will emit an alarm. It is deactivated by touching the display in any location.

To get to the next subfunction (displaying/resetting the maximum value storage for wind speed) -> touch
the display area „WIND" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Displaying/Resetting Maximum Value Storage for Wind Speed
• Touch the display area „WIND" repeatedly until the maximum wind speed and the display „MAX" (to the left of the
weather icons) flash.
• To reset the maximum value storage, keep the display area „WIND" pushed for 3 seconds. The currently measured
wind speed is assumed as the new maximum.

To get back to the first subfunction (switching display between average wind speed and gust speed) ->
touch the button „WIND" briefly 2x
Leaving setting mode -> touch the button „WIND" briefly 1x (or touch another display area wait for 30
seconds without touching the touch screen)
" appears below the display „HI AL". When the threshold value set is
" continue to flash, however, until the measured value drops below the threshold value set.
" appears below the display „WIND". At the receptive wind direction, the
71