E) Display Area „Pressure" (Barometric Pressure); Selecting Display Of The Relative/Absolute Barometric Pressure; Selecting Unit Of Barometric Pressure (Hpa, Mmhg, Inhg) - Conrad 67 28 61 Bedienungsanleitung

e) Display Area „PRESSURE" (barometric pressure)
The following setting and subfunctions are available:

• Selecting Display of the Relative/Absolute Barometric Pressure

• Selecting Unit of Barometric Pressure (hPa, mmHg, inHg)

• Setting and Activating/Deactivating Upper Barometric Pressure Alarm
• Setting and Activating/Deactivating Lower Barometric Pressure Alarm
• Displaying/Resetting Maximum Value Storage for Barometric Pressure
• Displaying/Resetting Minimum Value Storage for Barometric Pressure

Touch the display area „PRESSURE" briefly repeatedly until the desired subfunction flashes.
 Selecting Display of the Relative/Absolute Barometric Pressure
• Touch the display area „PRESSURE" briefly repeatedly until the barometric pressure flashes (e.g. „963.1")
• Select the desired display with the buttons „+" and „-".
abs = Absolute barometric pressure (currently measured and displayed barometric pressure)
rel = Relative barometric pressure (barometric pressure display converted to sea level)

To get to the next subfunction (selecting the barometric pressure unit) -> touch the display area „PRESSURE"
briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Selecting Unit of Barometric Pressure (hPa, mmHg, inHg)
• Touch the display area „PRESSURE" repeatedly until the wind speed flashes and the corresponding unit (e.g.
„963.1 hPa") flashes.
• Select the desired unit with the buttons „+" and „-".
hPa = Hectopascal
mmHg = Millimetre mercury column
inHg = Inch mercury column

To get to the next subfunction (setting and activating/deactivating the upper barometric pressure alarm)
-> touch the display area „PRESSURE" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
74