J) Display Area „Out Temp" (Outdoor Temperature); Switching Temperature Display (Temperature, Wind Chill Temperature, Dew Point Temperature); Selecting Temperature Unit (°C, °F) - Conrad 67 28 61 Bedienungsanleitung

j) Display Area „OUT TEMP" (outdoor temperature)
The following setting and subfunctions are available:

• Switching Temperature Display (temperature, wind chill temperature, dew point temperature)

• Selecting temperature unit (°C, °F)
• Setting and Activating/Deactivating Upper Temperature Alarm
• Setting and Activating/Deactivating Lower Temperature Alarm
• Displaying/Resetting Maximum Value Storage
• Displaying/Resetting Minimum Value Storage

Touch the display area „OUT TEMP" briefly repeatedly until the desired subfunction flashes.
 Switching Temperature Display (temperature, wind chill temperature, dew point temperature)
• Touch the display area „OUT TEMP" repeatedly until the outdoor temperature (e.g. „23.9") flashes.
• Select the desired temperature display with the buttons „+" and „-".
TEMP = Temperature (current measured value)
WINDCHILL = Wind chill temperature
This temperature value is calculated from the interrelation of temperature and wind speed.
For temperatures below +10 °C, higher wind speeds mean that the temperature perceived on
the human skin is lower than the actual temperature (example: Present outdoor temperature
-20 °C, wind chill temperature -34 °C at a wind speed of 40 km/h).
DEW POINT = Dew point temperature
The dew point is the temperature to which condensate just starts to form on an object.

To get to the next subfunction (selecting the temperature unit) -> touch the display area „OUT TEMP"
briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Selecting temperature unit (°C, °F)
• Touch the display area „OUT TEMP" repeatedly until the outdoor temperature flashes and the corresponding unit
(e.g. „23.9 °C") flashes.
• Select the desired unit with the buttons „+" and „-".
°C = Degrees Celsius
°F = Degrees Fahrenheit

To get to the next subfunction (setting and activating/deactivating the upper temperature alarm) -> touch
the display area „OUT TEMP" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
83