General Information - Conrad 67 28 61 Bedienungsanleitung

c) General Information
• For time information of the measured data in the weather station and PC to match, the time and date of the weather
station and PC must be adjusted to each other.

Usually, the weather station uses the precise DCF time and the PC the precise time of a time server online.
Adjustment usually is not required.
However, if you manually set the time/date of the weather station or PC, check and correct the settings
before connecting the weather station to the PC.
• If you reset/delete the rain sensor data at the weather station, there will be mistakes when displaying measured
values after export and assessment of the data in the PC if data has been saved on the PC for a while.
• Before the memory display in the lower right of the weather station display shows 100%, copy the weather station
data onto a PC. Otherwise, the oldest measured data will be overwritten with new ones. When assessing the data
on the PC, there may be an incorrect display.
• In some PC systems, present programmes may cause an error during entry in the Windows registry when installing
the included software.
In this case, proceed as follows:
1. Find the directory in which the programme „EasyWeather.exe" is installed.
2. Generate a file reg_graph.bat" with the Windows text editor.
3. Enter the following text line into the file:
regsvr32 easyweather.ocx
Save the file in the directory in which the programme „EasyWeather.exe" is installed.
4. Double-click the file „reg_graph.bat"; the graphics driver for the software should now be integrated into the Windows
registry correctly:
90