Displaying/Resetting Maximum Value Storage For Outdoor Humidity; Displaying/Resetting Minimum Value Storage For Outdoor Humidity - Conrad 67 28 61 Bedienungsanleitung

 Displaying/Resetting Maximum Value Storage for Outdoor Humidity
• Touch the display area „OUT HUMIDITY" repeatedly until the outdoor humidity and the display „MAX" (to the left of
the weather symbols) flash.
• To reset the maximum value storage, keep the display area „OUT HUMIDITY" pushed for 3 seconds. The new
maximum is the currently measured outdoor humidity until it changes.

To get to the next subfunction (displaying/resetting the minimum value storage for outdoor humidity) ->
touch the display area „OUT HUMIDITY" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Displaying/Resetting Minimum Value Storage for Outdoor Humidity
• Touch the display area „OUT HUMIDITY" repeatedly until the outdoor humidity minimum and the display „MIN" (to
the left of the weather symbols) flash.
• To reset the minimum value storage, keep the display area „OUT HUMIDITY" pushed for 3 seconds. The new
minimum is the currently measured outdoor humidity until it changes.

To get back to the first subfunction (setting and activating/deactivating the upper humidity alarm) -> touch
the display area „OUT HUMIDITY" briefly 2x
Leaving setting mode -> touch the button „OUT HUMIDITY" briefly 1x (or touch another display area wait
for 30 seconds without touching the touch screen)
87