Pc Connection; A) Software-Installation; B) Connecting Weather Station To The Pc, Starting Software - Conrad 67 28 61 Bedienungsanleitung

12. PC Connection

a) Software Installation
Place the CD included in the delivery in the corresponding drive of your computer (Windows operating system required,
Windows XP or newer).
If the installation programme does not start automatically, open the file manager and start the CD's installation programme
(e.g. „Setup.exe").
Follow the software or Windows instructions.
Administrator rights are required to install and operate the software. If you are working under a limited user
account, you cannot install the software.

b) Connecting Weather Station to the PC, Starting Software

Connect the USB socket at the tight of the weather station to a free USB port of your computer with the included
special USB cable. Do not use the cable for any other devices!
Windows recognises new hardware when the weather station is connected for the first time and installs the required
drivers.
Start the weather station software. Then the
data from the weather station are transferred
to the PC.
The software can only be started when you are
logged on to the computer with administrator
rights (see chapter 12. a).
In Windows 7 or Windows Vista, click the
software icon; you can start it as administrator
then with the right mouse button.

Depending on data volume, data transfer may take a while. Only after the data was read completely can
the software be used.
When the weather station's memory is full, export may take up to 2 minutes; calculation and presentation
of the data may take another 2 minutes, depending on the customer's speed.
For more information about the software observe, e.g., its help function.
For example, the software can be used to change the interval for saving measured data in the weather
station (default: 30 minutes) between 5 and 240 minutes.
89