Display Area "In Temp" (Indoor Temperature); Selecting Temperature Unit (°C, °F); Setting And Activating/Deactivating Upper Temperature Alarm - Conrad 67 28 61 Bedienungsanleitung

h) Display Area „IN TEMP" (indoor temperature)
The following setting and subfunctions are available:
• Selecting temperature unit (°C, °F)

• Setting and Activating/Deactivating Upper Temperature Alarm

• Setting and Activating/Deactivating Lower Temperature Alarm
• Displaying/Resetting Maximum Value Storage for Indoor temperature
• Displaying/Resetting Minimum Value Storage for Indoor temperature

Touch the display area „IN TEMP" briefly repeatedly until the desired subfunction flashes.
 Selecting temperature unit (°C, °F)
• Touch the display area „IN TEMP" repeatedly until the indoor temperature flashes and the corresponding unit (e.g.
„24.5 °C") flashes.
• Select the desired unit with the buttons „+" and „-".
°C = Degrees Celsius
°F = Degrees Fahrenheit

To get to the next subfunction (setting and activating/deactivating the upper temperature alarm) -> touch
the display area „IN TEMP" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Setting and Activating/Deactivating Upper Temperature Alarm
• Touch the display area „IN TEMP" repeatedly until the indoor temperature and the display „HI AL" flashes.
• Select the upper threshold of the indoor temperature with the buttons „+" and „-". Keep the respective button pressed
for quick adjustment.
• Use the button „ON/OFF" to switch the alarm function on or off.
With the alarm function on, the icon „
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„HI AL" and the icon „

To get to the next subfunction (setting and activating/deactivating the lower temperature alarm) -> touch
the display area „IN TEMP" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
" appears below the display „HI AL". When the threshold value set is
" continue to flash, however, until the measured value drops below the threshold value set.
79