Telecom Behnke 20-0013 Anleitung Seite 53

Code Parameter
Play a voice message
52 1 = play message no. 1 (short msg.)
2 = play message no. 2 (short msg.)
3 = play message no. 3 (short msg.)
4 = play message no. 4 (short msg.)
r = play message no. 5 (short msg.)
6 = play message no. 6 (long msg.)
7 = play message no. 7 (long msg.)
8 = play message no. 8 (long msg.)
9 = play message no. 9 (long msg.)
Upon entering configuration step code 52 and the corresponding no.
of the message to be played, the device will automatically play the
message in question. Playing the message will automatically stop af-
ter the message has elapsed. You may also stop the message playing
by pressing the # key.
Please note: You may only play the long messages nos. 7; 8 and 9 af-
ter you have previously set a corresponding amount of long messages
via configuration step code 50.
Voice message upon activation Relay 1:
53 0 = No voice message
1 = Play voice message no. 1
9 = Play voice message no. 9
This configuration step allows you to set a voice message to be
played upon activation of Relay 1. This, however, is only possible
for relay operations modes 1 to 6 or 18 and 19. For relay operations
mode 19, the voice message will only be played when the automatic
activation is manually turned on / off. The voice message will also be
played when the special symbols *71 and *73 are used in a telephone
number.
Voice message upon activation Relay 2:
54 0 = No voice message
1 = Play voice message no.1
9 = Play voice message no. 9
This configuration step allows you to set a voice message to be
played upon activation of Relay 2. This, however, is only possible
for relay operations modes 1 to 6 or 18 and 19. For relay operations
mode 19, the voice message will only be played when the automatic
activation is manually turned on / off. The voice message will also be
played when the special symbols *72 and *73 are used in a telephone
number.
www.behnke-online.com
Instructions Electronic Add-On Voice / Display / Real Time Clock
Configurations and Set-up
Confirmation
#
#
#
#
#
#
#
#
#
Default setting: 0
#
#
#
Default setting: 0
#
#
#
GB
53