Telecom Behnke 20-0013 Anleitung Seite 44

Instructions Electronic Add-On Voice / Display / Real Time Clock
GB GB
Configurations and Set-up
3. Press a button on your Behnke door intercom to open the door (open door function) from
Monday to Friday 8:00 am to 6:00 pm. From 6:01 pm until 7:59 am and on weekends, press the
same button to dial a given telephone number.
* 0000
40 HHMM [Beep] DDMMYY #
41 1*5 0800 [Beep] 1800#
21 *41*71*49 telephone number
*
4. For your Behnke door intercom device to act like a voice intercom system, dialling tones
and the like should not be audible. The door intercom's speakers will remain inactive until
the called party picks up inside.
* 0000
21 ***1 telephone number *800 ***0#
900 1#
9910 30#
* ▸
5. Call triggered by alarm entry with a voltage of 6 to 24 V and voice message played to the
called party. To record voice messages please follow configuration steps 50 to 51.
* 0000
22 telephone number *80x #
17 6#
▸
*
44
▸ Enter Set-Up mode
▸ Enter the current time and date
▸ Schedule from Monday to Friday 1*5, starting at
0800 (8:00 am) and ending at 1800 (6:00 pm)
▸ *41 Current time within schedule *71 activate relay 1
*49 Current not within schedule dial the telephone
number
▸ Exit Set-Up mode
▸ Enter Set-Up mode
▸ Disable speakers ***1 telephone number *800 sets
the device to recognise the call being answered or
not ***0 Enable speakers
▸ Enables advanced configurations
▸ Time the phone will ring (e.g. 30 seconds)
Exit Set-Up mode
▸ Enter Set-Up mode
▸ telephone number *80x sets the device to recognise,
the call being answered or not. x = the position
number of the recorded voice message in confi-
gurations step 51
▸ Operations mode alarm entry 6; dials number
saved in configurations step 22
Exit Set-Up mode
www.behnke-online.com