Telecom Behnke 20-0013 Anleitung Seite 46

Instructions Electronic Add-On Voice / Display / Real Time Clock
GB GB
Configurations and Set-up
Code Parameter
*9x
*90x
**x
**0
*#
****
***0
***1
With version 1.34 or later:
*4**1
*4**2
*4*xy
*5*xy
*5**x
*6*0
*74
*75
*76
*77
With version 1.4 or later:
*4*#
With version 1.42 or later:
***2
***3
***4
***5
***6
***7
***8
***9
46
pointer to telephone number (x=1...9)
pointer to speed dial (x=00...99)
individual group call (x=1=...9=next telephone number)
Hotline function
flash function
stop dialling
Mute off
Mute on
in case relay 1 is activated
in case relay 2 is activated
check a variable (condition) (x=0..9, y=0..9) x=y?
The condition is fulfilled if value x equals value y.
Set variables (x=0..9, y=0..9) x:=y will set
variable x to the value y
Increment variable (x=0..9) x++ increments the
variable x (for x=9, the x++=0)
Disable the timer *6* x mm direct call button x (x=1..9)
activate after mm (mm=00..99) minutes
Disable Relay 1 (only for operations mode 18)
Enable Relay 1 (only for operations mode 18)
Disable Relay 2 (only for operations mode 18)
Enable Relay 2 (only for operations mode 18)
with telephone number for second connection
Enable telephone function (only when line is not busy)
Enable code lock function (only when line is not busy)
Enable speed dial function (only when line is not busy)
Enable two-way-communication
Disable two-way-communication
Change two-way-communication to "Speaking" (only with
two-way-communication enabled)
Change two-way-communication to "Listening" (only with
two-way-communication enabled)
Switch two-way-communication setting (only with
two-way-communication enabled)
Confirmation
www.behnke-online.com