Telecom Behnke 20-0013 Anleitung Seite 49

Code Parameter
To set schedules faster, you may simultaneously assign one schedule
to multiple days of the week. To do so, start by entering the day of the
week followed by the * key. Enter a second day of the week to create
an interval of days to which the schedule about to be set will apply.
Example: Validity period: Mon - Fri 8:00 am to 4:00 pm and no sche-
dule for Sat - Sun
41 1 [beep] *5 [beep] 0800 16000 [beep] # set schedule for Mon - Fri
41 6 [beep] *7 [beep] # delete schedule for Sat - Sun
By default, no schedule is predefined.
Schedule 2:
42 Day of the week [beep] schedule
Cf. Configuration step 41.
Timer control Relay 1:
43 0 = disabled
1 = relay activation enabled according to schedule no. 1
2 = relay activation enabled according to schedule no. 2
Relay timer control works in connection with configuration step 08.
Timer control does not work with operations modes 0, 14 and 15. Once
you enable timer control, activating Relay 1 is limited to the validity
periods set in the schedule when set to operations mode 1 to 13 and
16 to 18,. Operations mode 19 will automatically activate Relay 1 for
the schedule's validity period and deactivate the relay outside the
schedule's validity periods.
Timer control Relay 2:
44 0 = disabled
1 = relay activation enabled according to schedule no. 1
2 = relay activation enabled according to schedule no. 2
Relay timer control works in connection with configuration step 12. Timer
control does not work with operations modes 0, 14 and 15. Once you
enable timer control, activating Relay 2 is limited to the validity periods
set in the schedule when set to operations mode 1 to 13 and 16 to 18.
Operations mode 19 will automatically activate Relay 2 for the schedule's
validity period and deactivate the relay outside the schedule's validity
periods.
Timer control telephone button:
45 0 = disabled
1 = telephone function enabled according to schedule no. 1
2 = telephone function enabled according to schedule no. 2
Once you enable timer control for the telephone function (provided
it has been enabled via configuration step 16), using the telephone
function is limited to the validity periods set by the schedules.
www.behnke-online.com
Instructions Electronic Add-On Voice / Display / Real Time Clock
Configurations and Set-up
Confirmation
Parameters: cf. text
#
Default setting: 0
#
#
#
Default setting: 0
#
#
#
default: 0
#
#
#
GB
49