Yamaha DSP-AX1 Bedienungsanleitung Seite 23

Right Front
Effect Speaker
SPEAKERS
FRONT
+ +
– –
REAR
+ +
– –
+ +
– –
CENTER REAR CENTER
SPEAKERS
FRONT
+ +
– –
REAR
+ +
– –
+ +
– –
CENTER REAR CENTER
Right Rear
Speaker
Rear Center Speaker
Subwoofer system
PREOUT/MAIN IN
FRONT
IN
REAR
REMOTE 1 (SURROUND)
OUT
SUB
WOOFER
SPLIT
REMOTE 2 MONO
IN CENTER
IN
REAR CTR
RB-
2320
CENTER
Right
OUT
Subwoofer
MAIN
IN
RS
232C
system
CTRL MAIN
OUT
OUT
+5V
100Ω 20mA
Hookups
Left Front
Connecting the Front Effect Speakers
Effect Speaker
Connect the + and – terminals of your right and left Front Effect
speakers to the L and R FRONT + and – terminals on this unit.
Connecting the Rear and Rear Center Speakers
Connect the + and – terminals of your right and left Rear speakers to
1
1
the L and R REAR + and – terminals on this unit.
Connect the + terminal of your Rear Center speaker to the REAR
2
2
CENTER + terminal and the – terminal of your Rear Center speaker
to REAR CENTER – terminal.
Left Rear
Speaker
Connecting a Front Subwoofer
Connect the signal input jack on your subwoofer to the PRE OUT/
MAIN IN SUBWOOFER MONO jack.
By connecting two Subwoofers to the SUBWOOFER SPLIT jacks, this
unit can reproduce subtle directional changes in the low frequency sounds.
When you use two Subwoofers, connect both of them to the SUBWOOFER
SPLIT jacks using pin plugs.
Caution:
• The SUBWOOFER jacks (output) have a built-in high cut-off filter (90 Hz). When
using a powered subwoofer, set the high cut-off frequency to "MAX" on your
Subwoofer.
Left
Subwoofer
system
21