Connecting Machine To Power Supply; For Your Safety - ELNA 683 Gebrauchsanweisung

Connecting Machine to Power
Supply
The power switch should be off. Before
connecting the power cord/foot control,
make sure the voltage and frequency
shown on the machine are identical to
your electrical power. Insert the
machine/foot control plug into the machine
and the power supply plug into the wall.

For Your Safety

1. While the machine is in operation, always
keep your eye on the sewing area and do
not touch any moving parts - needle(s),
flywheel, movable cutting blade, loopers,
etc.
2. Always switch off the power switch
and unplug from the power supply:
when leaving the machine
unattended
when attaching or removing parts
when cleaning the machine.
3. Do not place anything on the foot
control.
NOTE (USA only)
: Use only Matsushita
Electric model 4C316B202 foot control with
overlock model 683 and 686.
18