Getting Ready To Sew Connecting The Machine To The Power Supply; Controlling Sewing Speed - ELNA eXtend easycover Bedienungsanleitung

q
y
q
t
e
w
r
6
GETTING READY TO SEW
Connecting the Machine to the Power Supply
z Turn off the power switch, and connect the
machine plug to the machine socket.
x Connect the power supply plug to your power
supply.
c Turn on the power switch.
q Power switch
w Machine plug
e Machine socket
r Power supply plug
t Power supply
y Foot control

Controlling Sewing Speed

Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the
machine runs.
Step on the foot control with the presser foot lifter up, and
practice controlling the speed.
q Foot control
For Your Safety:
* While the machine is in operation, always keep your
eyes on the sewing area, and do not touch any
moving parts such as the thread take-up lever, loopers,
handwheel or needles.
* Always disconnect the machine from the power
supply:
— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.
* Do not place anything on the foot control,
except when the machine is in use.
Operating instruction:
• The symbol "O" of a switch indicates the "off" position of
a switch.
• Foot controller Model YC-482J-1 is for use with this
sewing machine (U.S.A. and Canada only).