Inhaltsverzeichnis
Werbung
SAFETY 4 THREAD . SAFETY 4 FILS . SEGURIDAD 4 HILOS
DF
1
SL
2.5
CW
N
Example of a Program Set-up
Safety 4 Thread
Model 683 only
Use the recommendations for settings
found in the stitch definitions. See pages
32~36.
Model 686 only
Use the recommendations for the
settings found on the reference card.
NOTE: Machine should not be
threaded before program set-up
occurs. Cut and remove all threads.
HINT: Cut thread at looper and
needle eyes and hand pull thread
away.
IMPORTANT: Never press on foot
control to sew out thread.
IMPORTANT: Always hand turn
flywheel towards you (counter-
clockwise).
Elna recommends reading symbols
from left to right.
1. Adjust differential feed dial to 1.
2. Adjust stitch length dial to 2.5.
3. Set cutting width dial to N.
28
Werbung
Inhaltsverzeichnis
