Inhaltsverzeichnis
Werbung
q
N
O
w
e
14
Getting Ready to Embroider
Connecting Machine to Power Supply
Always use the power supply cord that came with
the machine.
To connect machine to power supply, turn off
q
the power switch
. Insert machine plug
the machine and the power supply plug
the wall socket.
Your machine may come equipped with a polarized
plug (one prong wider than the other). A polarized
plug reduces the risk of electrical shock. This plug is
intended to fit into a polarized outlet. If the plug does
not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
For Your Safety
Do not use extension cords or plug adapters.
Do not touch plug with wet hands.
Always turn off the power/light switch first and then
unplug from the electrical outlet. Examples:
• when leaving the machine unattended
• when cleaning the machine
• when attaching or removing parts such as
needle or needle plate
Do not place heavy items on cords. Do not subject
cords to heat. Do not use damaged cords. Have the
cord repaired immediately.
While the machine is in operation, always keep your
eye on the sewing area and do not touch any
moving parts such as the thread take-up lever,
flywheel or needle.
w
into
e
into
Werbung
Inhaltsverzeichnis
Fehlerbehebung
