Inhaltsverzeichnis
Werbung
SECTION VIII
Maintenance
Proper machine cleaning and oiling are
essential to ensure maximum machine
performance.
Cleaning and Oiling
Unplug the machine from the electrical outlet.
Open the front cover.
Remove the presser foot by pushing the lever
behind the needle clamp.
Loosen the screws on the needle plate with the
screwdriver and remove the needle plate.
Disengage the movable cutting blade.
Use the brush to remove all lint and fiber
accumulation.
Place a drop of oil as indicated in drawing.
Oiling should be performed for every 8 hours
of actual sewing operation (approximately
once a month).
Reattach the needle plate.
To reattach the presser foot, place the foot
underneath the presser foot area and lower
the needle bar. The foot will snap back into
place.
69
Werbung
Inhaltsverzeichnis
