Inhaltsverzeichnis
Werbung
Starting to Sew
Always test sew on scraps of the same
fabric that you will be using. Place the
fabric scrap under the presser foot and
needles.
If the fabric is extra bulky, pull forward on
the presser foot lever to have more
clearance under the foot.
Swing up the presser foot lever to lower the
presser foot.
Hand turn the flywheel (towards you) to form
the first few stitches. Begin using the foot
control at a slower speed, gradually building
up the speed.
Hand guide the fabric gently while sewing.
Check the stitch formation. If the stitch has
irregularities, check the threading.
When you reach the end of the fabric, continue
sewing to form stitches off the fabric (overlock
chain-off threads). Keep pressing the foot
control until you are able to cut the overlock
chain-off threads with the thread cutter.
Continue sewing by simply placing the next
fabric piece in front of the feed dogs. Tip up
the front end of the foot and insert the fabric
under the foot.
NOTE: It is not necessary to lift up the
presser foot when placing the next fabric
piece.
51
Werbung
Inhaltsverzeichnis
