Stryker Prime Serie Bedienungsanleitung Seite 74

English
(Continued)
EN
Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects, and people.
Note 3: The ISM (industrial, scientific and medical) bands between 0.15 MHz and 80 MHz are 6.765 MHz to 6.795
MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz.
a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast, and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey
should be considered. If the measured field strength in the location in which the Optional Electric Lift or Electric Litter
and Optional Scale System is used exceeds the applicable RF compliance level above, the Optional Electric Lift or
Electric Litter and Optional Scale System should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as reorienting or relocating the Optional Electric Lift or
Electric Litter and Optional Scale System.
b Over the frequency range 150 kHz to 80 MHz, field strengths are less than 3 V/m.
*Applies to optional electric litter only.
1-62
EMC information
1125-309-005 REV A
a
survey , should be less than the compliance
level in each frequency range
Interference may occur in the vicinity of
equipment marked with the following symbol:
b
.
www.stryker.com