Setting The Cooking Time - Angelo Po 091FR7GD Bedien- Und Installationshandbuch

SETTING THE COOKING TIME

Manual cooking
Proceed as follows.
1 - Press the key (D).The last value set appears on
the display (A).
2 - Press the keys (F-G) to increase or decrease
the values shown on the display.
The cooking time increases or decreases by 30
seconds each time one of the keys (F-G) is
pressed.
3 - Press the key (D) again to start the cooking cy-
cle.
If the (D) key is pressed after the cooking cycle
is started, the display shows the cooking time
set for 4 seconds.
Programmed cooking
Proceed as follows.
1 - Keep pressing the key (L) until the display (A)
shows the cooking time required (up to 5 preset
cooking times can be recalled).
2 - Press key (D) to start the cooking cycle.
D A
F G L
Modify program
Proceed as follows.
1 - Press the key (L) until the display (A) shows the
cooking time you wish to modify.
2 - Press the keys (F-G) to increase or decrease
the values shown on the display.
The cooking time increases or decreases by 30
seconds each time one of the keys (F-G) is
pressed.
3 - Keep the key (L) pressed (about 5 seconds) un-
til the buzzer sounds. The value on the display
(A) will stop flashing.
Important
The value which was modified is deleted
from the appliance's memory and the new
value set is saved.
4 - Press key (D) to start the cooking cycle.
D
- 11 -
A M
F G L
IDM-39619400600E.tif
IT
GB
DE
FR
ES
English