Setting The Cooking Time; Activates/Deactivates The Temperature Holding (Melting) Function - Angelo Po 0N1FR1ID Bedienshandbuch

Manual cooking
Proceed as follows.
Press the key (D).
1)
The last value set appears on the display (A).
Press the keys (F-G) to increase or decrease the
2)
values shown on the display.
The cooking time increases or decreases by
30 seconds each time one of the keys (F-G) is
pressed.
Press the key (D) again to start the cooking
3)
cycle.
If the (D) key is pressed after the cooking cycle
is started, the display shows the cooking time
set for 4 seconds.

ACTIVATES/DEACTIVATES THE TEMPERATURE HOLDING (MELTING) FUNCTION

Proceed as follows.
Press key (E) to activate the temperature
1)
GB
holding (melting) function.
The light (Q) comes on.
Press key (E) to deactivate the temperature
2)
holding (melting) function.
The light (Q) goes out.
Important Importante
The temperature holding function is always
activated whenever a heating operation is
started with the real temperature in the well
below 90°C.
3269870_ut_GB_rev.2

SETTING THE COOKING TIME

- 10 -
A
F G D
Q A
ENGLISH