Angelo Po 091FR7GD Bedien- Und Installationshandbuch Seite 49

FILTERING OIL (091FR7GX)
Important
To carry out this operation the Operator's
constant presence is required.
To carry out this operation, proceed as follows.
1 - Press the button (A) to take the appliance into
the STOP status.
The indicator light (B) switches off.
Important
Leave the appliance to cool down so that
the oil reaches a temperature below 70°C; if
this is not the case the appliance will not fil-
ter (HOT appears on the display).
2 - Open the hatch (C)
3 - Open the drain cock slowly (D).
4 - Introduce the filter (E) (supplied) into the drip
tray (F).
5 - Empty the oil from the well into the drip tray (F).
Important
Do not keep the oil in the drip tray.
6 - Close the drain cock (D).
7 - Lower the pipe completely (G).
D
C
F
- 15 -
8 - Press the button (L) and wait for the operation.
The indicator light (M) switches on and FILE
appears on the display
9 - Raise the pipe (G).
10-Close the hatch (C).
The appliance is ready for successive use.
Important
– Do not use the appliance without oil in
the well so as not to cause damage to the
structure of the appliance itself.
– Use the filtering system with oil only.
– Do not exceed the maximum level indicat-
ed on the plate, positioned on the drip
tray, to prevent the overflow of oil during
transport.
Caution - warning
Do not dump oil in the environment; dis-
pose of it in accordance with the laws in
force in the country of use.
A
B
E
IT
GB
L
DE
M
FR
ES
G
English